Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 6 de 6
Filtrar
Mais filtros










Base de dados
Intervalo de ano de publicação
1.
N Biotechnol ; 80: 1-11, 2024 May 25.
Artigo em Inglês | MEDLINE | ID: mdl-38163476

RESUMO

Polysaccharide Utilization Loci (PULs) are physically linked gene clusters conserved in the Gram-negative phylum of Bacteroidota and are valuable sources for Carbohydrate Active enZyme (CAZyme) discovery. This study focuses on BD-ß-Gal, an enzyme encoded in a metagenomic PUL and member of the Glycoside Hydrolase family 154 (GH154). BD-ß-Gal showed exo-ß-galactosidase activity with regiopreference for hydrolyzing ß-d-(1,6) glycosidic linkages. Notably, it exhibited a preference for d-glucopyranosyl (d-Glcp) over d-galactopyranosyl (d-Galp) and d-fructofuranosyl (d-Fruf) at the reducing end of the investigated disaccharides. In addition, we determined the high resolution crystal structure of BD-ß-Gal, thus providing the first structural characterization of a GH154 enzyme. Surprisingly, this revealed an (α/α)6 topology, which has not been observed before for ß-galactosidases. BD-ß-Gal displayed low structural homology with characterized CAZymes, but conservation analysis suggested that the active site was located in a central cavity, with conserved E73, R252, and D253 as putative catalytic residues. Interestingly, BD-ß-Gal has a tetrameric structure and a flexible loop from a neighboring protomer may contribute to its reaction specificity. Finally, we showed that the founding member of GH154, BT3677 from Bacteroides thetaiotaomicron, described as ß-glucuronidase, displayed exo-ß-galactosidase activity like BD-ß-Gal but lacked a tetrameric structure.


Assuntos
Carboidratos , Glicosídeo Hidrolases , Glicosídeo Hidrolases/química , Domínio Catalítico , Polissacarídeos , beta-Galactosidase , Especificidade por Substrato , Cristalografia por Raios X
2.
Carbohydr Polym ; 278: 118913, 2022 Feb 15.
Artigo em Inglês | MEDLINE | ID: mdl-34973732

RESUMO

Bifidobacteria confer many health effects, such as fiber digestion, pathogen inhibition and immune system maturation, especially in the newborn infant. The bifidobacterial exopolysaccharides (EPS) are often associated with important health effects, but their thorough investigation is hampered by lack of knowledge of the EPS localization, which is important for efficient EPS isolation. Here we present a straightforward isolation procedure to obtain EPS of four commercial bifidobacterial strains (B. adolescentis, B. bifidum, B. breve, and B. infantis), that are localized at the cell membrane (evidenced using cryo-EM). This procedure can be applied to other bifidobacterial strains, to facilitate the easy isolation and purification for biological experiments and future application in nutraceuticals. In addition, we demonstrate structural differences in the EPS of the four bifidobacterial strains, in terms of monosaccharide composition and size, highlighting the potential of the isolated EPS for determining specific structure-activity effects of bifidobacteria.


Assuntos
Bifidobacterium/química , Membrana Celular/química , Polissacarídeos Bacterianos/isolamento & purificação , Polissacarídeos Bacterianos/química
3.
J Biol Chem ; 297(4): 101129, 2021 10.
Artigo em Inglês | MEDLINE | ID: mdl-34478709

RESUMO

Chitin deacetylases (CDAs) are found in many different organisms ranging from marine bacteria to fungi and insects. These enzymes catalyze the removal of acetyl groups from chitinous substrates generating various chitosans, linear copolymers consisting of N-acetylglucosamine (GlcNAc) and glucosamine. CDAs influence the degree of acetylation of chitosans as well as their pattern of acetylation, a parameter that was recently shown to influence the physicochemical properties and biological activities of chitosans. The binding site of CDAs typically consists of around four subsites, each accommodating a single sugar unit of the substrate. It has been hypothesized that the subsite preferences for GlcNAc or glucosamine units play a crucial role in the acetylation pattern they generate, but so far, this characteristic was largely ignored and still lacks structural data on the involved residues. Here, we determined the crystal structure of an Aspergillus niger CDA. Then, we used molecular dynamics simulations, backed up with a variety of in vitro activity assays using different well-defined polymeric and oligomeric substrates, to study this CDA in detail. We found that Aspergillus niger CDA strongly prefers a GlcNAc sugar unit at its -1 subsite and shows a weak GlcNAc preference at the other noncatalytic subsites, which was apparent both when deacetylating and N-acetylating oligomeric substrates. Overall, our results show that the combination of in vitro and in silico methods used here enables the detailed analysis of CDAs, including their subsite preferences, which could influence their substrate targets and the characteristics of chitosans produced by these species.


Assuntos
Amidoidrolases/química , Aspergillus niger/enzimologia , Simulação por Computador , Proteínas Fúngicas/química , Acetilglucosamina/química , Amidoidrolases/metabolismo , Cristalografia por Raios X , Domínios Proteicos , Especificidade por Substrato
4.
Nat Commun ; 12(1): 5424, 2021 09 14.
Artigo em Inglês | MEDLINE | ID: mdl-34521828

RESUMO

Stabilization of reactive intermediates is an enabling concept in biomass fractionation and depolymerization. Deep eutectic solvents (DES) are intriguing green reaction media for biomass processing; however undesired lignin condensation is a typical drawback for most acid-based DES fractionation processes. Here we describe ternary DES systems composed of choline chloride and oxalic acid, additionally incorporating ethylene glycol (or other diols) that provide the desired 'stabilization' function for efficient lignocellulose fractionation, preserving the quality of all lignocellulose constituents. The obtained ethylene-glycol protected lignin displays high ß-O-4 content (up to 53 per 100 aromatic units) and can be readily depolymerized to distinct monophenolic products. The cellulose residues, free from condensed lignin particles, deliver up to 95.9 ± 2.12% glucose yield upon enzymatic digestion. The DES can be recovered with high yield and purity and re-used with good efficiency. Notably, we have shown that the reactivity of the ß-O-4 linkage in model compounds can be steered towards either cleavage or stabilization, depending on DES composition, demonstrating the advantage of the modular DES composition.

5.
Biotechnol Biofuels ; 14(1): 127, 2021 May 31.
Artigo em Inglês | MEDLINE | ID: mdl-34059129

RESUMO

BACKGROUND: Nowadays there is a strong trend towards a circular economy using lignocellulosic biowaste for the production of biofuels and other bio-based products. The use of enzymes at several stages of the production process (e.g., saccharification) can offer a sustainable route due to avoidance of harsh chemicals and high temperatures. For novel enzyme discovery, physically linked gene clusters targeting carbohydrate degradation in bacteria, polysaccharide utilization loci (PULs), are recognized 'treasure troves' in the era of exponentially growing numbers of sequenced genomes. RESULTS: We determined the biochemical properties and structure of a protein of unknown function (PUF) encoded within PULs of metagenomes from beaver droppings and moose rumen enriched on poplar hydrolysate. The corresponding novel bifunctional carbohydrate esterase (CE), now named BD-FAE, displayed feruloyl esterase (FAE) and acetyl esterase activity on simple, synthetic substrates. Whereas acetyl xylan esterase (AcXE) activity was detected on acetylated glucuronoxylan from birchwood, only FAE activity was observed on acetylated and feruloylated xylooligosaccharides from corn fiber. The genomic contexts of 200 homologs of BD-FAE revealed that the 33 closest homologs appear in PULs likely involved in xylan breakdown, while the more distant homologs were found either in alginate-targeting PULs or else outside PUL contexts. Although the BD-FAE structure adopts a typical α/ß-hydrolase fold with a catalytic triad (Ser-Asp-His), it is distinct from other biochemically characterized CEs. CONCLUSIONS: The bifunctional CE, BD-FAE, represents a new candidate for biomass processing given its capacity to remove ferulic acid and acetic acid from natural corn and birchwood xylan substrates, respectively. Its detailed biochemical characterization and solved crystal structure add to the toolbox of enzymes for biomass valorization as well as structural information to inform the classification of new CEs.

6.
Front Chem ; 9: 655983, 2021.
Artigo em Inglês | MEDLINE | ID: mdl-34041222

RESUMO

Innovative biomass fractionation is of major importance for economically competitive biorefineries. Lignin is currently severely underutilized due to the use of high severity fractionation methodologies that yield complex condensed lignin that limits high-value applicability. Mild lignin fractionation conditions can lead to lignin with a more regular C-O bonded structure that has increased potential for higher value applications. Nevertheless, such extraction methodologies typically suffer from inadequate lignin extraction efficiencies and yield. (Semi)-continuous flow extractions are a promising method to achieve improved extraction efficiency of such C-O linked lignin. Here we show that optimized organosolv extraction in a flow-through setup resulted in 93-96% delignification of 40 g walnut shells (40 wt% lignin content) by applying mild organosolv extraction conditions with a 2 g/min flowrate of a 9:1 n-butanol/water mixture with 0.18 M H2SO4 at 120°C in 2.5 h. 85 wt% of the lignin (corrected for alcohol incorporation, moisture content and carbohydrate impurities) was isolated as a powder with a high retention of the ß-aryl ether (ß-O-4) content of 63 linking motifs per 100 C9 units. Close examination of the isolated lignin showed that the main carbohydrate contamination in the recovered lignin was butyl-xyloside and other butoxylate carbohydrates. The work-up and purification procedure were investigated and improved by the implementation of a caustic soda treatment step and phase separation with a continuous integrated mixer/separator (CINC). This led to a combined 75 wt% yield of the lignin in 3 separate fractions with 3% carbohydrate impurities and a very high ß-O-4 content of 67 linking motifs per 100 C9 units. Analysis of all the mass flows showed that 98% of the carbohydrate content was removed with the inline purification step, which is a significant improvement to the 88% carbohydrate removal for the traditional lignin precipitation work-up procedure. Overall we show a convenient method for inline extraction and purification to obtain high ß-O-4 butanosolv lignin in excellent yields.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA
...